Kair Anti-Mould Additive for Emulsion & Gloss Paint - 50 ml - Protects Against Mildew and Fungus Growth

Product Information

Most customers buy “Anti Mould Additive” to add to an emulsion paint of their own colour choice. It can also be added to our “Kingfisher Weatherflex range of masonry paints in areas where green mould growth is prevalent on building exterior. Preparation & Application If you are looking to paint over and redecorate walls and ceilings that have already been subject to mould and mildew, you will also require a good mould wash. While anti mould paints are perfect for preventing mould from developing on surfaces, painting over an already mould area will not solve the issue. Before you paint, you should ensure that a thorough and decent mould wash is completed to remove any exciting mould growth. Here at ACS Limited we always recommend cleaning and performing a mould wash before applying anti mould emulsion, or any other type of anti mould paint to the area. Should you have any questions about mould wash and mould wash products, be sure to get in touch with us today. If necessary, apply an appropriate primer or sealer to bare metal or masonry surfaces. For new or porous plaster surfaces thin the first coat if necessary according to the manufacturer’s instructions. Allow enough time to dry thoroughly. For example, if your bathroom suffers from condensation, you could look into installing a proper ventilation system. These might be expensive to install but mould resistant paint is only really going to work for a few years before you’ll need to paint it again. Can You Paint Over Mould With Anti Mould Paint?

Any paint that you have can be turned into an anti-mould coating to protect against mould and fungus in the home using Kair additive. Prior to re-painting using “Kingfisher Anti Mould Paint Additive” you should pre-treat the mould infected area with Kingfisher “ Mould Cure” to neutralise the existing spores and clean the surface. This particular paint is professional strength (but lower odour) and is one of the most effective paints when it comes to preventing damp and mould even against the most persistent condensation. Both employees and self-employed workers will pay less in National Insurance from next year, Chancellor Jeremy Hunt has announced in today's Autumn Statement. Yes, anti mould paint is completely safe for internal use. While some anti mould paints contain biocides, once dry these are not harmful.When it comes to damp proof products, Dryzone are one of the first brands to come to mind for us so any list about anti mould paint is naturally going to warrant a double inclusion. This time, we’re talking about their magnolia paint.

Ensure that the area is well-ventilated before use. Wear relevant personal protective equipment (mask, gloves, safety glasses etc.).Storage: Store safely in frost-free conditions away from direct sunlight, sources of heat and foodstuffs Whilst we went for Ronseal’s anti mould paint as our number one choice for DIYers, all the paints/additives we’ve included will do a good job at inhibiting mould growth. Kingfisher Anti Mould Paint Additive” is a broad spectrum, liquid fungicidal additive which can be stirred into most water based paints and surface coatings to impart highly effective mould inhibiting properties to the cured paint finish. Once cured the product leaves an “active film” fungicide which is hostile to mould spores and therefore permits re-decorating with confidence that mould will not re-grow. Yes, anti mould paint does a good job at inhibiting mould growth in areas where moisture and condensation is a problem as the biocides contained within the paint damage the cell membranes and essentially kills it before it has the chance to grow. Now the important part, the painting. Start with your first coat of paint, firstly painting around the edges of the wall or ceiling using your paint brush. Once this is done, you can then use a medium-pile roller to paint the rest of the surface.

Add Kingfisher Anti-Mould Paint Additive to almost any standard emulsion to make your own anti-fungal paint that matches the existing paint finish perfectly! The chances are, you are looking for an effective mould preventing solution that will do the job long-term. For this reason, we highly recommend Suretherm Anti-Condensation Paint. Suretherm helps prevent the route cause of the problem - the moisture!Apply the paint in the normal way according to the manufacturer’s instructions. General Product Information