Highest achievable strip quality – guarantees reproducible results and maximises yields, thereby reducing costs Wire size refers to a wire’s diameter, which is often measured according to the American Wire Gauge (AWG) measurement system. AWG sizes range from 0000 to 40. It can be confusing, because the thinner the wire, the larger the AWG number. Wire can be solid or stranded; the stranded wires have a larger diameter. The most common gauges of wire in residential settings are between 6 and 14 AWG, but you might be working with gauges outside of that range, depending on the jobs and setting involved. Make sure to select a wire stripper that can accommodate the wire sizes you’ll need, and keep in mind that wire strippers can have different gauge ranges for stripping, cutting, and crimping. Safety Criteria

Modern electronic devices, as well as the communications systems that link them, are full of wire. From the enormous conductors that route local-area-network data around microwave communications systems to the miles and miles of wiring that connect all the critical control and communications systems on aircraft and other transportation systems, to the minute strands that provide interconnections in microelectronic systems or carry the signals in medical implants, wires are indispensable for moving signal and power about. As we noted before, though, this versatility comes at a cost: time. You may be able to do more with a manual wire stripper than an automatic one, but you are going to spend a lot more time and effort in doing so. A Wire Stripper That Can Do Both

Address

One of the best ways for stripping scrap copper wire s is to use a Multi-Feed wire stripping machine. Hands down, the most economical and fastest way to process scrap copper. All you have to do is put the wire into the right size feed hole and away you go. In this article, we will explore various methods for stripping scrap copper cable and explain why a wire stripping machine is the best tool. 1. Burning Scrap wire with an open fire Burning scrap copper wire is illegal and toxic. Burning scrap wire is one of the easiest ways to recover the copper from the insulation. With that being said, there are huge risks in doing so, and we highly suggest you consider much safer and cleaner methods to strip scrap cable. With these wire stripping tools, it’s like having a constant tug of war until the insulation starts to give and the Pin blade cuts a slit into the wire. Another factor is to firmly mount these units to the edge of your workbench otherwise it will slip when you try to pull the wire through the rollers with too much tension! In critical manufacturing applications such an approach is unacceptable and, where quality is all-important, damage free laser wire stripping comes into its own. For state-of-the-art applications it is critical to be able to strip insulation precisely from wire without damage to the conductor. Laser-based wire strippers accomplish this simply, by relying on the ability of light to selectively remove non-metallic insulating materials while leaving the metallic conductor completely untouched. Above left: Mechanically stripped, twin core shielded cable.

Stripping Experience: Plenty of manual adjustment. Works great for the same wire size. Not recommended for 1/4″ scrap wire and below. Such strippers have automatic features as well as a hand crank to help you control the speed. These machines may be more expensive than other choices. You must ultimately consider whether you really need this hybrid functionality for your current needs and future projects. The Importance of Channels If you have a need that cannot be met with one of our mainstream SIENNA products, we will be happy to discuss your application with you. We can undertake process evaluation and development in our application laboratories and if appropriate we can tailor a system accordingly (see below). Future Developments and Applications The BWS-38-MF-DA features a spring tension self-adjusting multi-feed system for stripping the wire. Just feed the wire into the right size feed hole and away you go – As spokesman Joe Williams from Bluedog Wire Strippers often states. B.D.: Old-school electricians often used heavy-duty linesman pliers to cut and strip wire. However, I’m always in favor of using tools that were specifically designed to perform a particular task, and wire strippers are made with the distinct characteristics needed to safely and efficiently strip and cut wires.Unquestionably, scrappers who decide to buy a wire stripping machine are astute business people who are highly motivated to make their business a success!

Some people tend to think of a small tool when they think of a wire stripper. A lot of tool kits will come with a small manual wire stripper, meant for a person to strip usually just a small section of a wire, and of course most people would think of this. However, there are heavy-duty industrial grade wire strippers available that are meant for completely stripping the insulation away from many wires. The CO-Z WSMS025BL Automatic Electric Wire Stripping Machine is one such device, made to work overtime for the purpose of stripping wires. Durability: Opt for a machine that’s built to last. High-grade materials and solid construction can withstand regular use. The BWS-38-MF-DA is a heavy-duty multi-feed manual wire stripping machine aimed at scrap guys who may not have super high volumes of wire but still want a quality manual unit for stripping scrap wire. Some wire stripping machines offer automatic tools and some require you to do everything manually. But which approach is best for the average handyman?

Laser Wire Stripping

Since 1987, when RtMc, Inc, now Spectrum Technologies USA, Inc, introduced the first commercial CO2 Laser Wire Stripping machine, there has been an increasing need for the further development of laser technology to enable an increasing range of insulating materials and wire types to be stripped. This is due to the development of new insulation types, new ways of extruding the insulating material onto wire, varying bonding properties and the trend for smaller, lighter-weight wire applications, combined with the development of new products using these wires. Laser Wire Stripping Today Rigid and Reliable Construction: The wire stripper tool is equipped with a steel blade of high hardness, ensuring its working stability for a long time. Besides, it is made of quality aluminum alloy that is wear-resistanct and tear-proof.