Innokin T20-S Prism Tank + 2 x Coils included ( 1 pre installed ) (Black)

Product Information

Optimised for use at low wattages, there's the option of a pre-installed 0.8 Ohm Prism-S coil as well as a spare 1.5 Ohm Prism T20 coil. We recommend high PG eliquids of 50% and above for best performance. Proving to be a reliable and simple tank, the Prism T20-S was the perfect choice for this kit. It can hold 2ml of e-liquid and is compatible with any flavour you like. Thanks to the removable top section, you can refill it without having to dismantle the entire tank. If you’re looking for less vapour and inhale that’s similar to a cigarette, we recommend the 1.5 Ohm Prism S coil and either a 50/50 or high PG e-liquid. For slightly increased vapour production, the 0.8 Ohm coil and a 50/50 e-liquid will work best. To change the coil you will need to empty the tank – so either decant the liquid into a suitable container or pour onto a tissue and discard.

For deliveries to the Scottish Highlands, Scottish Islands, Northern Ireland, Isle of Man, Scilly Isles, Isle of Wight & Jersey, please allow 2 to 5 days. Saturday and Sunday delivery is also not available in the areas listed above The Innokin EZ.WATT vape starter kit has been designed for all vapers. It offers a simple option that can be used for MTL (Mouth To Lung) vaping with minimal maintenance required. Powered by a 1500mAh battery that lasts all day, you have the option of choosing between three different power levels to experiment and find your perfect vape. Each kit comes complete with the Innokin Prism T20S tank that will hold 2ml of e-liquid and is compatible with a range of coils (two are included to get you started).The Endura Prism T20S tank is also available as a separate item for use on other batteries or vape mods. Yes, you are correct that this is an MTL device and not a ‘true sub ohm device’. There is a little confusion coming in with sub ohm coils in e cigs such as the T20. There is no airflow adjustment on this, it would help as it’s a pretty airy MTL vape. Some smokers might prefer to have a slightly tighter draw to mimic a cigarette. Basic operation

The T20S can be paired with either the 0.8 Ohm or 1.5 Ohm coil from the Prism S coil range and both will give a full flavour. 0.8 Ohms will produce a moderate amount of vapour, whereas the 1.5 Ohm version is more discreet and produces less vapour. With the 0.8 Ohm coil we'd recommend an e-liquid with a mix of around 50% - 70% VG and for the 1.5 Ohm coil we'd suggest an e-liquid that's 50% PG or higher. Capable of holding up to 2ml of e-liquid, refilling is made simple thanks to the top filling mechanism that features on this tank. For example : 3500 mAh would become 3.5 amp (maximum allowed). What do I need to know about storing lithium batteries safely? The Innokin Endura T20-S starter Kit includes everything apart from E-liquid to get you up and running. Plus some spares to help you maintain it.

As the T20S runs lower wattage a 12mg nic won’t give ‘as much’ of a hit as a true direct to lung/sub ohm tank. As such I would say if the 6mg nicotine isn’t doing it for you then a 12mg nic will be OK with this and well worth trying out. With high VG liquid you should get more vapour production. This is an ok vapour – not massive clouds which I have got from the same liquid in lower resistance coils – but still good enough.