All Aico alarms have a date-code label on the side of them which tells you exactly when the alarm was made and also the recommended replacement date. There is likely to be Carbon Monoxide present. Turn off any gas appliances, open windows and doors and leave the property. If it is a regular single beep (approximately once every minute), then the battery may be running low, and you may need to change the battery in the alarm. This is relevant for the 140RC Series alarms.

Ei3024 Instructions - Aico Ei3024 Instructions - Aico

Above this is the ‘Replace By’ date, but note that the date on the label shows the maximum life of the alarm and alarms should always be replaced before their life is up. If you are using an Alarm Controller Ei450 this will continue for as long as you hold down the ‘Test’ button. This alarm is a multi-sensor fire alarm - it contains both optical and heat sensors to provide a total fire coverage. The intelligent software it has installed allows it to detect all fire types (TF1 to TF6 & TF8) surpassing traditional single sensor Alarms. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms. This is the Aico Ei3024 is a multi-sensor fire alarm with enhanced optical smoke sensor and automatic dust compensation; it delivers a faster response to a wider range of fires. This multi-sensor alarm detects both smoke and heat from a fire, and so the location is ideally in the hallway, landing, living room, and bedroom areas.Performing a regular test is a vital part of ensuring continued fire and carbon monoxide detection. Alarms should be tested monthly to ensure everything is working correctly. The four-digit code shows you the year and week that the alarm was made. The first two digits relate to the year and the second two digits relate to the week. If the alarm contains AudioLINK – Once the alarm has stopped activating and it is safe to enter the property extract a report to identify the details of the incident.

Ei3024 / 3016 / 3014 Alarms - Aico Mains Powered Ei3024 / 3016 / 3014 Alarms - Aico

Never ignore a beeping alarm, as it is a warning sign of either a danger in the home or that an alarm needs maintenance. Most of our alarms have a 10-year life, after which they should be replaced to ensure you carry on getting the best protection. If the alarms are sounding, there may be a fire present. You should evacuate the property and be absolutely sure there is no fire before returning. If in doubt, always assume there is a real fire present and take the necessary action.If you have more than one alarm in the property and they are interconnected, this will also trigger all the other alarms in the property. The Ei3024 is powered by 230V AC mains. In the event of mains failure, the rechargeable 10 year built in tamper-proof lithium cells will provide up to 3 months power supply in the case of a wireless RF installation or up to 6 months in any other case. The memory feature allows an Alarm that has previously activated to be easily identified (through the red flashing LED).