If you are not using cardboard, make a bundle of threads that are about 18” long. It’s easier to start longer and trim than to use pieces that are short and hard to handle.) Cut all the ends of the tassels evenly with sharp scissors. Separate the yarns. Thread some beads and tie them to the car keys. If I had added some metallic thread in between, it would have added a sparkle in between. Attach the ends of the smaller rectangle together to make the loop. Use binder clips to keep them together till the glue dries off. You can make a head for the tassel ( used to cover the head of the tassel) using beads, or even polymer clay. Make lines starting from one side spaced 1/8 inch, and ending 1/2 inch from the top. Cut out these lines carefully with scissors; you have a leather fringe in your hand.

Although the sight of those graceful catkins makes you think of England (and thrives there, in the warm climate), Garrya elliptica is native to the West Coast of the United States. A long-lived shrub (with a 150-year lifespan) that grows 24 inches a year until it reaches a height of up to 15 feet at maturity, silk tassel bush also is a common sight in Northern California. Handsome specimens grow in the botanical gardens of San Francisco and in the East Bay, in Berkeley. Wrap the yarn in the middle tightly and when finished glue the end of the thread to secure it. Wind cord in the middle of the embroidery flossSilk tassel shrubs are dioecious, which means the plants produce male and female, catkin-like flowers (silk tassels) on separate plants. Male blooms are long and creamy yellow, eventually turning gray as they dry. Female blooms are similar but shorter. Silk Tassel Bush Planting

Bend the middle portion and tie it with another piece of yarn. Bend the tied portion by the middle and then tie together Silk tassel shrubs grow in USDA plant hardiness zones 8 through 10. They prefer areas without extremely hot summers and appreciate a little shade during the afternoon. However, they grow in full sun in cooler climates. Sari tassels are used in the hems of the pallus of saris. They add to the beauty of the sari. Some silk saris will have thread hanging down to make these tassels, and you just need to tie them. You do not have to add extra tassels here. These tassel threads are made of warp threads of the sari fabric. Take a bunch of thread (one whole embroidery floss would do) and keep it around your cord, as in the picture below.

Silk tassel bush is a name that pretty much says it all. Evergreen shrub Garrya elliptica is puts its Edwardian elegance on display in winter, when creamy white catkins that look like 14-inch tassels drip like icicles from its branches.

You need to find very soft material to make these very elegant and modern-looking tassels. They look great attached to bags and purses. I even made a keychain tassel with a faux leather scrap piece, but the constant use is killing it. You need to cut out two pieces of the material to make this tassel. One for the loop and the other for the fringes. And a piece to wrap around the top for a neat look. But sometimes, you may need to add extra sari tassels. You can make them with simple hand embroidery threads or machine embroidery threads. Just under the knot, use a thread to tie tightly securing the fringe to the cord. Cut out the thread tails.Cut out one rectangle of size 10 inches by 4 inches for a bigger tassel or 4 inches by 2 inches for a medium one and one rectangle of 2 inches by 1/4 inch. Wrap the fringe around this knot tightly. The fringe should cover the knot at least once all around. I am using simple fabric frayed at the edges to make the fringes. The long length of the tassels can be tied again for layers of tassels. The first tassel is parted in half. One part is tied together with a part of a nearby tassel. You part the tassel threads into sections and tie them to each other. Use beads strung onto the tassel threads for a beautiful and ornate look to your sari. First, decide on the length of the tassel you want. Cut out a piece of cardboard that is 1/2 inch longer than this. Your hands can replace this if you are in a hurry. I think I have seen someone use a fork to make tassels. Remember to keep the threads in the center of the cardboard and keep the threads from spreading out. Also, ensure you are not wrapping the thread too tight that the cardboard is bending or too loose that the loops are slipping out. The tension should be even.